China High Efficiency 25kg. Cm Planetary Gear Motor 12V/24V dc motor

Solution Description

A. Specification of Large Efficiency 25Kg.cm Planetary Gear Motor 12V/24V:

1. Voltage: twelve/24V
2. Pace: 2-2000RPM
3. Torque: .2-25Kgf.cm
4. Output Power: .1-10W
5. Gearbox Ratio:  1:3.3 to 1: 2142
6. Gearbox Diameter: 32mm
7. Gearbox Length: 20.7-forty three.8mm
8. Motor Size: 29.1mm
nine. Shaft Diameter: 6mm
10. Shaft Length: Customized
Note: The info sheet is only for reference, We can make the motor according to your need after Analysis

B. Business Capability

HangZhou CZPT Co. Ltd is a company and exporter of numerous of motors with above ten a long time expertise.
Our product ranges contain:
one) DC Brush motor: 6-130mm diameter, .01-1000W output power
2) DC Spur Equipment Motor: 12-110mm diameter, .1-300W output electricity
three) DC Planeary Gear Motor: ten-82mm diameter, .1-100W output power 
four) Brushless DC Motor: 28-110mm, 5-1500W output power 
five) Stepper Motor: NEMA 08 to NEMA 43, Can with gearbox and guide screw
six) Servo Motor: 42mm to 130mm diameter, fifty-4000w 
seven) AC Gear Motor: forty nine to 100mm diameter, 6-a hundred and forty output power 

1. Production Line:

2. Testing Products:

3. Certificates:

4. Client Visits:

6. FAQ:

Q: What’s your main products?
A:We currently generate Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can verify the technical specs for earlier mentioned motors on our website and you can e mail us to advise needed motors per your specification too.

Q:How to pick a suitable motor?
A:If you have motor pictures or drawings to display us, or you have in depth specs like voltage, pace, torque, motor dimensions, operating mode of the motor, needed lifestyle time and sound level and so on, please do not wait to allow us know, then we can advise suited motor for each your ask for appropriately.

Q: Do you have custom-made service for your common motors?
A:Sure, we can personalize per your request for the voltage, pace, torque and shaft measurement/shape. If you want additional wires/cables soldered on the terminal or need to have to insert connectors, or capacitors or EMC we can make it also.

Q:Do you have personal layout service for motors?
A:Yes, we would like to design motors individually for our consumers, but it could want some CZPT charge and layout demand. 

Q:Can I have samples for tests initial?
A:Yes, certainly you can. Following verified the needed motor specs, we will quote and offer a proforma bill for samples, once we get the payment, we will get a PASS from our account section to commence samples appropriately.

Q:How do you make confident motor top quality?
A:We have our possess inspection processes: for incoming components, we have signed sample and drawing to make confident qualified incoming supplies for creation procedure, we have tour inspection in the process and ultimate inspection to make positive qualified goods prior to transport.

Q:What’s your direct time?
A:Typically speaking, our typical standard solution will require twenty five-30days, a bit lengthier for personalized goods. But we are quite versatile on the direct time, it will relies upon on the specific orders

Q:What is your payment phrase?
A:For all our new customers, we will require 40% deposite, 60% compensated prior to shipment.

Q:When will you reply soon after got my inquiries?
A:We will response within 24 hours once get your inquires.

Q:How can I trust you to make confident my cash is secure?
A:We are licensed by the third social gathering SGS and we have exported to over 85 nations up to June.2017. You can examine our track record with our present consumers in your place (if our customers do not brain), or you can purchase by means of alibaba to get trade assurance from alibaba to make confident your cash is protected.

Q:What’s the minimum get amount?
A:Our bare minimum purchase quantity depends on different motor versions, remember to email us to verify. Also, we generally do not settle for individual use motor orders. 

Q:What is your shipping and delivery approach for motors?
A:For samples and offers significantly less than 100kg, we typically recommend specific shipping For hefty deals, we typically suggest air shipping and delivery or sea transport. But it all relies upon on our customers’ needs.

Q:What certifications do you have?
A:We at the moment have CE and ROSH certifications.

Q:Can you deliver me your cost list?
A:Given that we have hundreds of distinct items, and price tag varies for every various specs, we are not CZPT to supply a price checklist. But we can estimate in 24 hours once acquired your inquirues to make certain you can get the price tag in time.

Q:Can I visit your business?
A:Indeed, welcome to check out our firm, but please enable us know at least 2 weeks in progress to support us make confident no other meetings during the working day you pay a visit to us. Thanks!

Weclome contact with us if have any queries about this motor or other products!

Application: Universal, Household Appliances, Power Tools, Curtain and Others
Operating Speed: Low Speed
Function: Driving
Casing Protection: Open Type
Structure and Working Principle: Brush
Type: DC Gear Motor

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Application: Universal, Household Appliances, Power Tools, Curtain and Others
Operating Speed: Low Speed
Function: Driving
Casing Protection: Open Type
Structure and Working Principle: Brush
Type: DC Gear Motor

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China High Efficiency 25kg. Cm Planetary Gear Motor 12V/24V     dc motor	China High Efficiency 25kg. Cm Planetary Gear Motor 12V/24V     dc motor
editor by czh 2023-01-25