China Hot selling Zd 2 or 4 Poles CZPT 104mm AC Induction Gear Motor with Great quality

Item Description

ZD 2 or 4 Poles CZPT 104mm AC Induction Gear Motor 

Solution Description

Induction motors have single-period type and a few-stage sort. This sort of motors do not only use electromagnetic coils and capacitors for the duration of commencing, but also in the course of operation. Even though the commencing torque is not very big, but it has a easy composition, large trustworthiness, high performance and could continuously work. It is commonly utilised in automation market, logistics, assembly line and and so forth.

The Features of Induction Motor:

1.Induction motor depends on capacitor and electromagnet coil when starting up and rotating. However its starting torque is not very big, it has a straightforward structure, large performance and can rotate repeatedly.
2.The solitary-section motor can make torque in the reverse  to the direction of rotation when rotating. Make sure you adjust the rotation route of solitary-phase motor only after it stopped.
three.A few-period motor depends on 3-stage source. It has a large effectiveness and can get a higher beginning torque.

How To Go through

Motor :
6     I     K     180    (R)    GU – S     F
a     b    c       d       e       f       g     h

6      GU     15      K
a        b       c       d



Continuous Score of 6IK120GU-( )

Constant Score of 6IK140GU-( )

Constant Rating of 6IK200GU-( )

When the motor is authorized underneath a variety of safety expectations, the design title on the nameplate is the approved model identify.
Note: “-A” means the voltage 110V, the assembly capacitor benefit it is in accordance the label.

Proportions(Device: mm):

Gear Motor-Torque Desk

•Gearbox and mid-gearbox can be sold independently.
•Enter the gear ratio in the box ( ) in the model name.
•The grey qualifications implies the very same CZPT course of the motor although the CZPT route of other individuals are reverse.
•The pace is calculated by dividing the motor’s synchronous speed (50Hz: 1500r/min, 60Hz: 1800r/min) by the equipment ratio. The real velocity is 2%~twenty% much less than the displayed worth, dependent on the measurement of the load.
•To lessen the pace CZPT the equipment ratio in the table, connect a decimal gearbox (equipment ratio: 10) in between the gearbox and motor. In that situation, the permissible torque is 5 N.m.

Allowable Torque of 6IK120GU-( ) Unit: Upside (N.m)/Underneath-aspect (N.m)

 Allowable Torque of 6IK140GU-( ) Device: Upside (N.m)/Under-facet (N.m)

Allowable Torque of 6IK200GU-( ) Device: Upside (N.m)/Beneath-aspect (N.m)


Comprehensive Pictures

Wiring Diagram

Other models of CZPT AC Induction Equipment Motor


A lot more merchandise,remember to click listed here…

Company Profile

Shipping and delivery

Our Services

one.Servicing time & Warranty: one calendar year soon after leaving manufacturing unit 
two.Other service: Including modeling choice manual, installation guidebook, and problem shooting guide, etc.


Q: What’re your major products?
A: We at the moment make Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Equipment Motors, Brushless DC Motors, AC Motors, Higher Precision Planetary Gearbox and Precision Cycloidal Gearbox and so forth.. You can examine the technical specs for previously mentioned motors on our internet site and you can e mail us to suggest required motors for each your specification too.

Q: How to decide on a suitable motor or gearbox?
A:If you have motor images or drawings to present us, or you have detailed specifications, this sort of as, voltage, pace, torque, motor measurement, operating method of the motor, essential lifetime and noise level and many others, you should do not be reluctant to let us know, then we can advise suitable motor for every your request accordingly.

Q: Do you have a tailored services for your normal motors or gearboxes?
A: Yes, we can customise per your request for the voltage, pace, torque and shaft size/form. If you require extra wires/cables soldered on the terminal or need to have to include connectors, or capacitors or EMC we can make it way too.

Q: Do you have an person layout support for motors?
A: Of course, we would like to layout motors independently for our customers, but some type of  molds are necessory to be developped which could require actual value and layout charging. 

Q: What is your direct time?
A: Usually talking, our typical standard item will need fifteen-30days, a bit longer for customized merchandise. But we are very versatile on the direct time, it will rely on the specific orders.

Rewards of a Planetary Motor

Apart from currently being a single of the most efficient types of a travel, a Planetary Motor also gives a excellent number of other benefits. These features enable it to generate a huge variety of equipment reductions, as effectively as create larger torques and torque density. Let us take a nearer seem at the rewards this mechanism has to provide. To understand what makes it so interesting, we’ll discover the diverse types of planetary systems.

Photo voltaic gear

The photo voltaic equipment on a planetary motor has two unique positive aspects. It produces less sounds and heat than a helical equipment. Its compact footprint also minimizes sound. It can operate at substantial speeds with no sacrificing efficiency. Nevertheless, it should be managed with constant care to operate effectively. Photo voltaic gears can be very easily destroyed by water and other debris. Photo voltaic gears on planetary motors might need to have to be changed above time.
A planetary gearbox is composed of a sunshine gear and two or a lot more planetary ring and spur gears. The solar gear is the principal equipment and is driven by the input shaft. The other two gears mesh with the sunshine equipment and have interaction the stationary ring equipment. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This results in an output shaft that rotates.
An additional gain of planetary gears is that they can transfer higher torques while getting compact. These rewards have led to the generation of solar gears. They can decrease the quantity of energy eaten and generate much more power. They also offer a lengthier service lifestyle. They are an superb selection for photo voltaic-driven automobiles. But they need to be set up by a licensed photo voltaic strength firm. And there are other rewards as nicely. When you put in a photo voltaic equipment on a planetary motor, the energy created by the sun will be transformed to beneficial power.
A solar gear on a planetary motor utilizes a solar equipment to transmit torque from the solar to the planet. This system operates on the theory that the sunlight equipment rotates at the very same rate as the earth gears. The sunshine gear has a typical layout modulus of -Ns/Np. Therefore, a 24-tooth solar gear equals a 3-1/2 world gear ratio. When you contemplate the effectiveness of photo voltaic gears on planetary motors, you will be able to decide whether or not the solar gears are more successful.

Sunshine equipment

The mechanical arrangement of a planetary motor comprises of two elements: a ring equipment and a solar gear. The ring equipment is fixed to the motor’s output shaft, whilst the sun gear rolls close to and orbits all around it. The ring equipment and sunlight equipment are joined by a planetary carrier, and the torque they make is dispersed across their enamel. The planetary framework arrangement also reduces backlash, and is critical to accomplish a fast begin and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will switch in the identical direction. The ring-equipment assembly is mounted in a provider. The provider equipment and sunlight equipment are connected to each and every other by a shaft. The planetary gears and sun gear rotate about every other on the ring-gear carrier to lessen the speed of the output shaft. The planetary gear technique can be multiplied or staged to receive a greater reduction ratio.
A planetary equipment motor mimics the planetary rotation technique. The enter shaft turns a central gear, recognized as the solar gear, although the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be simply mounted to a motor vehicle, and its reduced excess weight helps make it ideal for little cars. In addition to getting highly effective, a planetary equipment motor also delivers several other positive aspects.
A planetary gearbox employs a sun gear to give torque to the other gears. The world pinions mesh with an inside tooth ring gear to make rotation. The carrier also functions as a hub amongst the input equipment and output shaft. The output shaft combines these two parts, offering a increased torque. There are three sorts of planetary gearboxes: the sunlight equipment and a wheel drive planetary gearbox.

Planetary gear

A planetary motor equipment performs by distributing rotational power along a separating plate and a cylindrical shaft. A shock-absorbing system is provided amongst the separating plate and cylindrical shaft. This depressed part helps prevent abrasion use and international particles from getting into the system. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one particular another. The rotatable disc absorbs the affect.
An additional reward of a planetary motor gear is its efficiency. Planetary motor gears are hugely effective at transferring electrical power, with 97% of the enter energy being transferred to the output. They can also have higher equipment ratios, and offer minimal sound and backlash. This layout also enables the planetary gearbox to operate with electric motors. In addition, planetary gears also have a prolonged provider life. The effectiveness of planetary gears is owing in part to the massive variety of tooth.
Other advantages of a planetary motor equipment contain the relieve of shifting ratios, as well as the decreased safety stock. As opposed to other gears, planetary gears don’t demand specific resources for shifting ratios. They are utilized in numerous industries, and share areas throughout a number of measurements. This implies that they are expense-powerful to generate and demand less safety stock. They can endure higher shock and use, and are also compact. If you are searching for a planetary motor equipment, you have occur to the appropriate place.
The axial finish surface of a planetary equipment can be worn down by abrasion with a separating plate. In addition, foreign particles could enter the planetary gear gadget. These particles can damage the gears or even result in sound. As a consequence, you need to examine planetary gears for hurt and dress in. If you happen to be hunting for a equipment, make positive it has been extensively tested and mounted by a professional.

Planetary gearbox

A planetary motor and gearbox are a widespread mixture of electric and mechanical electrical power resources. They share the load of rotation amongst a number of equipment enamel to increase the torque capacity. This design and style is also much more rigid, with lower backlash that can be as low as one particular or two arc minutes. The benefits of a planetary gearmotor above a traditional electric powered motor contain compact dimensions, high efficiency, and much less chance of equipment failure. Planetary gear motors are also much more reliable and durable than typical electric motors.
A planetary gearbox is made for a solitary stage of reduction, or a multiple-stage device can be developed with a number of personal cartridges. Gear ratios may possibly also be selected according to consumer choice, both to confront mount the output phase or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a range of distinct possibilities available. These incorporate large-efficiency planetary gearboxes that obtain a ninety eight% performance at solitary reduction. In addition, they are noiseless, and lessen warmth loss.
A planetary gearbox might be employed to increase torque in a robotic or other automatic program. There are diverse varieties of planetary gear sets obtainable, which includes gearboxes with sliding or rolling sections. When picking a planetary gearset, think about the environment and other elements such as backlash, torque, and ratio. There are several positive aspects to a planetary gearbox and the positive aspects and drawbacks linked with it.
Planetary gearboxes are equivalent to those in a solar system. They function a central sun equipment in the middle, two or a lot more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure about a stationary solar equipment. When the gears are engaged, they are related by a carrier that is set to the machine’s shaft.

Planetary equipment motor

Planetary equipment motors lessen the rotational velocity of an armature by 1 or much more instances. The reduction ratio relies upon on the framework of the planetary equipment system. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a round pattern to switch the pinion 3. When the pinion rotates to the engagement situation, it is engaged with the ring gear 4. The ring equipment then transmits the rotational torque to the armature shaft. The consequence is that the engine cranks up.
Planetary equipment motors are cylindrical in form and are offered in a variety of energy ranges. They are typically manufactured of metal or brass and contain multiple gears that share the load. These motors can deal with enormous energy transfers. The planetary gear drive, on the other hand, requires far more elements, these kinds of as a sun’s gear and several planetary gears. For that reason, it may not be appropriate for all types of purposes. As a result, the planetary gear travel is typically utilized for much more intricate machines.
Brush dusts from the electric motor may possibly enter the planetary gear system and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the equipment engagement of the planetary gear device. If this occurs, the gears will not interact effectively and might make sound. In purchase to avert this sort of a circumstance from happening, it is essential to frequently inspect planetary equipment motors and their abrasion-resistant separating plates.
Planetary equipment motors arrive in several different electricity stages and measurements. These motors are typically cylindrical in shape and are manufactured of steel, brass, plastic, or a combination of both materials. A planetary equipment motor can be utilized in applications in which place is an situation. This motor also allows for reduced gearings in small areas. The planetary gearing allows for huge amounts of energy transfer. The output shaft size is dependent on the equipment ratio and the motor pace.

China Hot selling Zd 2 or 4 Poles CZPT 104mm AC Induction Equipment Motor     with Wonderful top qualityChina Hot selling Zd 2 or 4 Poles CZPT 104mm AC Induction Gear Motor     with Fantastic top quality