Working Range

In a replacement project, EP-Y2EJ-225M-4 is considered as a motor duty combined with controlled stopping or holding selection with efficiency 92.5%. The useful engineering question is how that operating point behaves in lifting, packaging, printing, transport and positioning machinery. Record the driven-machine load and output speed first, then check vibration 3.5 mm/s against the actual supply and duty. A motor row becomes meaningful only when those values are attached to the machine it will run.

Reference speed 1480 r/min is a useful catalog reference, but commissioning should create a site baseline under a known load. Note current, temperature and visible vibration at the same time. If a gearbox or chain stage is part of the drive, record its condition too before regional conformity work begins.

Process Fit

When the drive is assembled, EP-Y2EJ-225M-4 is considered as a motor duty combined with controlled stopping or holding selection with noise 90 dB(A). The useful engineering question is how that operating point behaves in lifting, packaging, printing, transport and positioning machinery. Record the driven-machine load and output speed first, then check rated output 45 kW against the actual supply and duty. A motor row becomes meaningful only when those values are attached to the machine it will run.

Destination country belongs in the technical record. A motor that is mechanically suitable may still sit inside a different efficiency, marking or conformity scope in the United States, European Union, Japan, Brazil, Mexico or another market. Separate that regulatory check from the machine calculation before regional conformity work begins.

Drive Package

During technical review, EP-Y2EJ-225M-4 is considered as a motor duty combined with controlled stopping or holding selection with vibration 3.5 mm/s. The useful engineering question is how that operating point behaves in lifting, packaging, printing, transport and positioning machinery. Record the driven-machine load and output speed first, then check reference speed 1480 r/min against the actual supply and duty. A motor row becomes meaningful only when those values are attached to the machine it will run.

The mechanical review should include gearboxes, couplings, brake controls, pulleys, sprockets and chains. In this model size, do not assume that matching power guarantees a matching shaft or flange. Confirm the drawing, bore, key, shaft engagement and guard space before regional conformity work begins.

Protection Strategy

For an OEM buyer, EP-Y2EJ-225M-4 is considered as a motor duty combined with controlled stopping or holding selection with rated output 45 kW. The useful engineering question is how that operating point behaves in lifting, packaging, printing, transport and positioning machinery. Record the driven-machine load and output speed first, then check rated current 85 A against the actual supply and duty. A motor row becomes meaningful only when those values are attached to the machine it will run.

For purchasing, state whether EP-Y2EJ-225M-4 is a new OEM selection, an interchange or part of an efficiency retrofit. That context decides which dimensions are fixed and which can change. Keep gearboxes, couplings, brake controls, pulleys, sprockets and chains inside the same scope before controls and guards are finalized. The selected row lists brake torque of 450 N·m and brake time of 0.80 s. Those values should be compared with the actual driven inertia and stopping function; a brake motor does not by itself define the machine safety system.

Assembly Review

At commissioning, EP-Y2EJ-225M-4 is considered as a motor duty combined with controlled stopping or holding selection with reference speed 1480 r/min. The useful engineering question is how that operating point behaves in lifting, packaging, printing, transport and positioning machinery. Record the driven-machine load and output speed first, then check efficiency 92.5% against the actual supply and duty. A motor row becomes meaningful only when those values are attached to the machine it will run.

If the machine speed is created through reduction, calculate the complete ratio from motor shaft to driven shaft. A gearbox, sprocket or pulley can change both speed and shaft loading. The drawing should show where gearboxes, couplings, brake controls, pulleys, sprockets and chains connect to EP-Y2EJ-225M-4 before controls and guards are finalized.

Export Project

Under steady production duty, EP-Y2EJ-225M-4 is considered as a motor duty combined with controlled stopping or holding selection with rated current 85 A. The useful engineering question is how that operating point behaves in lifting, packaging, printing, transport and positioning machinery. Record the driven-machine load and output speed first, then check noise 90 dB(A) against the actual supply and duty. A motor row becomes meaningful only when those values are attached to the machine it will run.

Rated output 45 kw is a useful catalog reference, but commissioning should create a site baseline under a known load. Note current, temperature and visible vibration at the same time. If a gearbox or chain stage is part of the drive, record its condition too before controls and guards are finalized.

Commissioning Data

Before the drawing is released, EP-Y2EJ-225M-4 is considered as a motor duty combined with controlled stopping or holding selection with efficiency 92.5%. The useful engineering question is how that operating point behaves in lifting, packaging, printing, transport and positioning machinery. Record the driven-machine load and output speed first, then check vibration 3.5 mm/s against the actual supply and duty. A motor row becomes meaningful only when those values are attached to the machine it will run.

Destination country belongs in the technical record. A motor that is mechanically suitable may still sit inside a different efficiency, marking or conformity scope in the United States, European Union, Japan, Brazil, Mexico or another market. Separate that regulatory check from the machine calculation before controls and guards are finalized. The selected row lists brake torque of 450 N·m and brake time of 0.80 s. Those values should be compared with the actual driven inertia and stopping function; a brake motor does not by itself define the machine safety system.

Fault Indicators

When a gearbox is added, EP-Y2EJ-225M-4 is considered as a motor duty combined with controlled stopping or holding selection with noise 90 dB(A). The useful engineering question is how that operating point behaves in lifting, packaging, printing, transport and positioning machinery. Record the driven-machine load and output speed first, then check rated output 45 kW against the actual supply and duty. A motor row becomes meaningful only when those values are attached to the machine it will run.

The mechanical review should include gearboxes, couplings, brake controls, pulleys, sprockets and chains. In this model size, do not assume that matching power guarantees a matching shaft or flange. Confirm the drawing, bore, key, shaft engagement and guard space before controls and guards are finalized.

Field Replacement

For maintenance planning, EP-Y2EJ-225M-4 is considered as a motor duty combined with controlled stopping or holding selection with vibration 3.5 mm/s. The useful engineering question is how that operating point behaves in lifting, packaging, printing, transport and positioning machinery. Record the driven-machine load and output speed first, then check reference speed 1480 r/min against the actual supply and duty. A motor row becomes meaningful only when those values are attached to the machine it will run.

For purchasing, state whether EP-Y2EJ-225M-4 is a new OEM selection, an interchange or part of an efficiency retrofit. That context decides which dimensions are fixed and which can change. Keep gearboxes, couplings, brake controls, pulleys, sprockets and chains inside the same scope before regional conformity work begins.

Final Specification

For this model, EP-Y2EJ-225M-4 is considered as a motor duty combined with controlled stopping or holding selection with rated output 45 kW. The useful engineering question is how that operating point behaves in lifting, packaging, printing, transport and positioning machinery. Record the driven-machine load and output speed first, then check rated current 85 A against the actual supply and duty. A motor row becomes meaningful only when those values are attached to the machine it will run.

If the machine speed is created through reduction, calculate the complete ratio from motor shaft to driven shaft. A gearbox, sprocket or pulley can change both speed and shaft loading. The drawing should show where gearboxes, couplings, brake controls, pulleys, sprockets and chains connect to EP-Y2EJ-225M-4 before regional conformity work begins.

Technical Parameters

The table below carries the documented data for this selected variant. Fields not documented for the row are not filled with approximate values.