Item Description

A. 45mm Large Torque DC Planetary Equipment Motor with Encoder Specification:

1. Voltage: 6V 12V 24V
2. Velocity: 1-1600rpm
3. Torque: 1-200kg. Cm rated torque
4. Gearbox 45mm Dia X 33.6-seventy three.8mm duration
5. Motor’s voltage, velocity, torque, shaft can settle for customizied requirment following evaluation.
6. Packing Information: 28*26*22.5cm, N. W. 14KGS 40PCS/CTNS
7. The datasheet and price tag selection only normal knowledge for reference, Equipment motor’s price tag are typically choose by Motor’s reduction ratio and torque. Make sure you fell cost-free to make contact with with me if youwant this motor

Dimension: 

  
B. Business Potential
 1. Generation line

3. Certificates:

4 Exhibitions And Client Go to:

5. FAQ(Q=Issue, A=Reply)

Q: What’s your primary items?
A:We presently produce Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors and so on. You can examine the specifications for previously mentioned motors on our web site and you can electronic mail us to advise essential motors for every your specification too.

Q:How to pick a suitable motor?
A:If you have motor images or drawings to show us, or you have thorough specs like voltage, velocity, torque, motor size, operating method of the motor, needed daily life time and sound degree and so forth, please do not be reluctant to enable us know, then we can suggest suitable motor for each your request accordingly.

Q: Do you have tailored services for your normal motors?
A:Yes, we can personalize for every your request for the voltage, pace, torque and shaft dimensions/form. If you require added wires/cables soldered on the terminal or want to include connectors, or capacitors or EMC we can make it also.

Q:Do you have personal design and style services for motors?
A:Yes, we would like to design motors individually for our clients, but it may possibly need some CZPT charge and style cost. 

Q:Can I have samples for tests very first?
A:Of course, absolutely you can. After confirmed the essential motor specs, we will estimate and supply a proforma bill for samples, once we get the payment, we will get a PASS from our account office to proceed samples appropriately.

Q:How do you make positive motor quality?
A:We have our personal inspection procedures: for incoming components, we have signed sample and drawing to make positive competent incoming supplies for production procedure, we have tour inspection in the process and closing inspection to make sure qualified products prior to shipping and delivery.

Q:What is your guide time?
A:Normally speaking, our normal standard merchandise will want 25-30days, a bit lengthier for customized goods. But we are quite versatile on the guide time, it will depends on the certain orders

Q:What’s your payment phrase?
A:For all our new customers, we will want 40% deposite, 60% paid out ahead of cargo.

Q:When will you reply soon after acquired my inquiries?
A:We will response in 24 several hours as soon as get your inquires.

Q:How can I trust you to make confident my money is secure?
A:We are qualified by the 3rd party SGS and we have exported to over eighty five international locations up to June.2017. You can check out our reputation with our current customers in your region (if our clients do not thoughts), or you can get by way of alibaba to get trade assurance from alibaba to make positive your cash is protected.

Q:What is the minimum buy amount?
A:Our minimum order amount depends on diverse motor models, please email us to examine. Also, we normally do not take personalized use motor orders. 

Q:What is your delivery approach for motors?
A:For samples and offers less than 100kg, we typically suggest specific shipping and delivery For heavy deals, we generally suggest air shipping and delivery or sea shipping. But it all relies upon on our customers’ demands.

Q:What certifications do you have?
A:We at the moment have CE and ROSH certifications.

Q:Can you send me your price record?
A:Considering that we have hundreds of diverse goods, and cost differs for every distinct specifications, we are not CZPT to provide a price list. But we can quotation inside of 24 several hours once got your inquirues to make confident you can get the price tag in time.

Q:Can I visit your firm?
A:Of course, welcome to pay a visit to our firm, but you should allow us know at the very least 2 months in progress to support us make positive no other meetings throughout the day you check out us. Many thanks!

Weclome contact with us if have any queries about this motor or other products!

###

###

###

###

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

editor by czh 2023-03-24